Wood blinds install

Use a steel measuring tape or level tool to ensure alignment. Center support brackets will need to be positioned off-center to not interfere with any internal mechanisms.

Snap the included valance clips over the front lip of the headrail — space your valance clips evenly as to not interfere with any mechanisms inside the blinds.

Slide the headrail into the brackets. Close the bracket covers by pressing up on the bottom of the bracket with your thumbs while lowering the front part of the bracket until they snap into place. Snap the valance into your valance clips. Test your new blinds. Use the pull cord to slowly raise and lower your blinds, and tilt your slats by either adjusting the tilt cord or rotating the wand. How to Install Outside Mount Wood Blinds If you measured for outside mount wood blinds, follow these simple installation steps: Position your blind on the wall surface or window trim.

Use a pencil to mark the left and right outside edges along the bottom and sides. Make sure your blind is centered and level. Align the side and bottom of your first mounting bracket along the inside of your pencil mark and fasten to the wall with screws.

Repeat this process for the opposite mounting bracket. If you have a center support bracket, install it slightly off-center above a section of the head rail so it will not interfere with the operation of the blind cord.

Snap the included valance clips over the headrail — space your valance clips evenly as to not interfere with any mechanisms inside the blinds. Attach the side returns of your valance using the supplied L-brackets. Snap your valance into the pre-installed clips. Download Article Explore this Article parts.

Tips and Warnings. Related Articles. Part 1. Choose the material for your blinds. There is a range of woods and wood finishes that you can select, including bamboo, basswood, faux wood and others. Different types of wood blinds may provide better insulation or may block light more effectively.

They may also have better quality finishes. Consider the color of the room. Find blinds with complementary colors or finishes. Some blinds also have ladder tapes, which are coverings made of cloth or other material that can be tailored to your room with different colors and textures.

Consider the type and size of window when selecting blinds. Some windows are very shallow and therefore need thinner blinds. Custom blinds will be more expensive but may be the best solution for windows with odd measurements or irregularly shaped windows.

Choose the style of blinds. Many blinds are adjusted using a cord that you pull to swivel the slats open and closed. There are also cordless lift blinds, which do not have cords.

These are safer options if you have small children who might pull on cords. You can also choose blinds that resemble shutters from the outside of the window.

Some blinds have rounded corners while others have square corners. Part 2. Ensure you have all the parts you will need. Remove your blinds from the package and lay out all of the mounting bracket parts.

Compare with the blinds installation instructions to make sure you have all the pieces. Choose the positioning of the mounting. Blinds can be mounted on the inside of the window inside mounting , on the outside of the window on the wall outside mounting , or on the ceiling above the window ceiling mounting.

Hold the blinds against the window to ensure they will fit properly for your preferred positioning. Inside mount: The blind slats are measured to fit inside the frame of the window and the mounting brackets are placed inside the top of the window frame.

Outside mount: The blinds are measured to overlap the window frame and the mounting brackets are installed on the wall above the frame. Ceiling mount: The blinds are measured to overlap the window frame and the mounting brackets are installed on the ceiling directly above the window. Make the correct measurements. Hold the blind head rail up to the window in the position where you plan for it go be mounted inside, outside or ceiling. Use a level to ensure the marks are even and so that the blinds will hang evenly.

Consult the instructions that came with your blinds kit for exact specifications, as they vary by manufacturer. If you are using inside mount blinds, hold the head rail up either flush with the wall inside the window jamb, or hold it back closer to the window.

Determine if you should use anchors to secure the mounting brackets. The best choice of anchor to secure the mounting bracket will depend on the type of wall you have. For drywall and plaster, use drywall anchors to hold in the screws. For brick or concrete walls, use masonry anchors. To install anchors, predrill a hole that is a suitable size for the anchor at the spot where you need the mounting bracket screw to go. Push the anchor into this hole until it is flush with the wall. Install the side mounting brackets.

These are typically cube-shaped pieces with one open side and one side with a sliding or hinged door. Hold the side mounting brackets up on the pencil marks you made. Place the bracket with the door side facing you and the open side pointing toward inside of the window. Open the bracket cover with a screwdriver. Screw the bracket in place using the screws that came with the product.

If you are using anchors, mark the screw holes with a pencil and predrill the holes. Install the anchors first before screwing the bracket to the wall. Position the support bracket. If your window blinds are wide enough, your kit may have come with a support bracket. This will go in the middle of the window, in line with the side brackets.

Measure between the two side brackets and find the middle. Mark this spot with a pencil. Use a level to ensure that the brackets will be even. If you plan to use anchors to secure the screws into the wall, predrill holes for their installation now.

Screw the support bracket in place. Insert the head rail into the brackets. This should snap into place. Some models may require that you hook the head rail onto the brackets. Make sure the blinds are in the closed position, which will make installation easier. Then fold down the bracket swivel flaps. Follow the instructions that came with your blinds to ensure you are doing it properly, as these could vary slightly depending on brand of blinds. Attach the valance. This piece goes along the top front of your blinds to hide the brackets.

Some models may have a protective covering on the valance that can be removed if you choose. Many valances are magnetic and will stick onto the head rail.

Others need to be inserted into the top of the blinds, which should snap into the sides. Attach the wand. Your blinds may have come with a wand that will enable you to open and close the blinds when you twist it. To attach the wand, locate the sleeve and hook mechanism that extends below the wall mounting. Slide the sleeve upwards to reveal the hook and hang the wand on this hook. Pull the sleeve back down to fully cover the hook. Mount the cord cleat.

Mount the cleat next to or above the window on the same side as the cord. Use the screws provided with the cord cleat and screw them into the wall.

Wrap the cord around the cord cleat to keep it out of reach of small children. Mount the hold-down bracket. Some blinds come with a hold-down bracket, which will keep the blinds in place when they fully cover the window. Install this bracket into the wall or the window facing at the bottom right side. Snap in the bracket pin end into the bottom slat of the blinds where there is a hole intended for this hold-down bracket pin.

Part 3. Carefully open and close the blinds. Do not yank on the cord to pull the blinds up or down. Make sure children do not pull on the cords or twist the slats.